1 to 2 of 2 products for
Lisle Rod Tool 54500
view: list | grid
Similar Searches:
54500 lite, ptp 54500 full, ptp 54500 lite, lisle rod tool 54500, lisle tie rod tool, lisle 5-pc, lisle serpentine belt tool, motion pro fork tool, lisle tie rod wrench, lisle lock nut tool, kd tool tool rod, lisle tool set drive, lisle 4wd, otc 8, kd tools rod adjuster, lisle tools line disc, 55250 carb tool, lisle pipe hanger tool, lisle carburetor pin tool, lisle macpherson strut tool, brake piston tool
All Categories > Automotive > Parts & Tools
-
(LIS54500) Large Inner Tie Rod Tool # 54500Also known as: LIS-54500, LIS54500; Works On Inner Tie Rods With Inaccessible Wrench Flats On Many Trucks and SUVs. The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation. This tool comes with four crows feet, sizes 1-7/16", 33.6mm, 38.4mm and 42mm, to fit many Toyota, Nissan, Ford, Lincoln, Mercury and Chevrolet truck and SUV applications. Also fits some Cadillac Escalade, Hummer H2, Honda Passport and Jeep Liberty applications. Shipping wt. 3 lbs. 4 oz ...Read MoreDetails on (LIS54500) Large Inner Tie Rod Tool # 54500
In Stock
-
Lisle 54500 SUV And Light Truck Tie Rod Toolworks on inner tie rods with inaccessible wrench flats on many trucks and suvs the long socket slips over tie rod end and crows foot engages on socket for easy removal and installation this tool comes with four crows feet - sizes 1-.4375in - 33.6mm - 38.4mm and 42mm - to fit many toyota - nissan - ford - lincoln - mercury and chevrolet truck and suv applications also fits some cadillac escalade - hummer h2 - honda passport - jeep liberty applicationsRead MoreDetails on Lisle 54500 SUV And Light Truck Tie Rod Tool
In Stock
-
Lisle Inner Tie Rod Tool - 45750Cost Plus Tools offers auto mechanic tools guaranteed to get the job done right. Contact us for more information about this product: Works on the Inner Tie Rods With Inaccessible Wrench Flats. Many inner tie rod end sockets do not have a complete hex on the full length of the socket. The rounded socket ends prevent access to the wrench flats. The 45750 tool utilizes five crows feet, sizes 1 3/16", 1 1/4", 1 5/16", 1 7/16" and 33.6mm, to ...Read MoreDetails on Lisle Inner Tie Rod Tool - 45750
In Stock
-
Lisle 5-pc. Tie-rod/Ball-joint/Pitman-arm Tool Kit 41500LISLE 5-PC. TIE-ROD/BALL-JOINT/PITMAN-ARM TOOL KIT Kit includes 2 handles which fit all 3 drop-forged steel forks. Great combination kit for separating and removing tie-rod ends, ball-joints and pitman-arms. This 5-pc. kit includes tie-rod spreader (11/16" wedge opening), ball-joint separator (15/16" jaw opening), pitman-arm wedge (1-1/8" opening), 8" handle (for use with regular hammer) and a handle with .401" shank (for use with air-impact hammer).Read MoreDetails on Lisle 5-pc. Tie-rod/Ball-joint/Pitman-arm Tool Kit 41500
In Stock
-
Lisle 5-pc. Tie-rod/Ball-joint/Pitman-arm Tool Kit 136312LISLE 5-PC. TIE-ROD/BALL-JOINT/PITMAN-ARM TOOL KIT Kit includes 2 handles which fit all 3 drop-forged steel forks. Great combination kit for separating and removing tie-rod ends, ball-joints and pitman-arms. This 5-pc. kit includes tie-rod spreader , ball-joint separator , pitman-arm wedge , 8 handle and a handle with .401 shank .Read MoreDetails on Lisle 5-pc. Tie-rod/Ball-joint/Pitman-arm Tool Kit 136312
In Stock
$43.52
$40.99 -
59000 Ratcheting Serpentine Belt Tool LisleSerpentine ratchet is used to release tension on the serpentine belts with a spring loaded idler pulley. It will work where conventional ratchets or breaker bars won't fit due to limited access. Tool includes a 19mm socket for Honda and Toyota applications. Features: Sockets are low profile to fit hard to reach areas Ratcheting head has a freewheel position that allows maximum leverage Comes with extension for hard-to-reach idler pulleys Used to remove and install belts on serpentine belt systems Spring loaded ...Read MoreDetails on 59000 Ratcheting Serpentine Belt Tool Lisle
In Stock
-
Motion Pro Damper Rod Fork ToolMotion Pro Damper Rod Fork Tool. Unique tool is 2-in-1. Aids in assembly/disassembly of most Kayaba & Showa inverted forks. Hardened steel with black finish.Read MoreDetails on Motion Pro Damper Rod Fork Tool
In Stock
$38.95
$36.99 -
(LIS46600) Universal Inner Tie Rod Wrench # 46600Also known as: LIS-46600, LIS46600; Features and Benefits Works on both inner tie rods with the round end socket or the type with the flats up to 1-31/64". Works on many Chrysler applications, Ford and Nissan with the non-flat round end socket. Comes with 1/4" short head hex wrench. Use with 1/2" drive. Speeds tie rod replacement timeRemoves Inner Tie Rod equipped with a completely round end socket. Also fits Inner Tie Rod Sockets with flats up to 1-31/64". The wrench head has three set ...Read MoreDetails on (LIS46600) Universal Inner Tie Rod Wrench # 46600
In Stock
$41.10
$29.73 -
Lisle Ratcheting Lock Nut Tool - 28000Two tools in one! Small end fits Ford 1986 to 1994 light trucks with Dana 44 front axle. Large end fits 1985 & newer Ford F150 - F350 trucks with the Dana 80 full floating rear axle. Press tool into lock nut and rotate to release the ratchet inside the lock nut. A torque wrench is used when installing. Use with 1/2" square drive.Read MoreDetails on Lisle Ratcheting Lock Nut Tool - 28000
In Stock
-
(KD 3312) Tie Rod Separator 21/32" Length 12" # 3312Also known as: KD 3312, KD3312, KDT-3312, KDT3312; Features and Benefits: Allows for use on all inner tie rods with 1-3/16" and 1-5/16" hex sizes The inner tie rod can be removed and installed without removing the rackRemoves and installs inner tie rods on many GM and some Chrysler products that do not have a hex inner end nut, but use 2 flats that measure 1-7/16" across. # KD 3312Read MoreDetails on (KD 3312) Tie Rod Separator 21/32" Length 12" # 3312
In Stock
$57.84
$40.85 -
Lisle Hand Impact Tool Set, 3/8" Drive - 29200Cost Plus Tools offers auto mechanic tools guaranteed to get the job done right. Contact us for more information about this product: Lisle Hand Impact Tool Set, 3/8" Drive. Loosens Rusted, Frozen Nuts, Bolts and Screws. Unique design delivers over 200 ft. of "Shock Torque." Can be reversed to tighten. Can also be used with impact sockets. 3/8" sq. drive with 3/8" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8" straight slot bits ...Read MoreIn Stock
-
Lisle 4WD Wheel Bearing Lock-Nut Tool - 27400#27400 combination tool for 4-slot and 6-slot applications. 1/2" drive. Not for use with impact wrench. Applications include: -------------------------------------------------------------------------------- Chevy 1/2, 3/4, 1 Ton 4WD front 60-72 Chevy 1/2, 3/4 4WD front 73-84 Chevy 1 Ton 4WD rear 73-81 Chevy 3/4 & 1 Ton 2 & 4WD rear 46-72 Chevy 1 Ton 4WD front 77-81 GMC 1/2, 3/4, 1 Ton 4WD front 60-72 GMC 1/2, 3/4 4WD front 73-84 GMC 1 Ton 4WD rear 73-81 GMC 3/4 & 1 Ton 2 & 4WD rear ...Read MoreIn Stock
-
Tools (OTC7096) 7/8" Tie Rod Adjusting Tool For Full Size Cars # 7096Also known as: OTC-7096, OTC7096; Features and Benefits: Used on full size cars with 7/8" diameter adjusting sleevesThis tool is used to adjust tie rods on specific vehicles. # OTC7096Read MoreDetails on Tools (OTC7096) 7/8" Tie Rod Adjusting Tool For Full Size Cars # 7096
In Stock
-
3961 Universal Tie Rod Adjuster KD ToolsPatented design works on flat, hex, and round rods Clamp force increases as load is applied Fits from 33mm to 41mm Fits hex up to 35. 5mm Works on inner tie rods, rack and pinion, and steering systems KD Tools 3961 Universal Tie Rod AdjusterRead MoreDetails on 3961 Universal Tie Rod Adjuster KD Tools
In Stock
-
LISLE TOOLS 39960 TRANS LINE DISC2-Pc Transmission Oil Cooler Line Disconnect Tool - Ford Two sizes, 3/8" and 1/2", are designed to disconnect transmission cooler lines. Use 3/8" size for 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS. Use 1/2" size for Ford Super Duty Trucks, F250, F350 and F450. Tip is specially stepped to fit connector. Simply push the line toward the connector, then engage tool and pull line from conector. Set comes skin packed. Shipping weight: 1 oz.Read MoreDetails on LISLE TOOLS 39960 TRANS LINE DISC
In Stock
$23.78
$5.74 -
(LIS55250) GM Chrysler Carberetor Adjusting Tool # 55250Also known as: LIS-55250, LIS55250; Features and Benefits: Heavy-duty flexible shaft for easy access Four adapters conveniently store in the hollow handle Skin-packedThis gives easy access to adjust idle or mixture screws on GM and Chrysler carburetors. It comes with four different adapters, which are easy to change. Easy to use! # LIS55250Read MoreDetails on (LIS55250) GM Chrysler Carberetor Adjusting Tool # 55250
In Stock
$14.95
$9.93 -
(LIS38350) Rubber Support Bracket Removal Pliers for Exhaust Systems # 38350Also known as: LIS-38350, LIS38350; 38350Rubber Support Bracket Removal Pliers for Exhaust SystemFeatures and Benefits:This tool separates the rubber supports from exhaust hanger brackets.The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier. # LIS38350Read MoreDetails on (LIS38350) Rubber Support Bracket Removal Pliers for Exhaust Systems # 38350
In Stock
$34.48
$15.45 -
(LIS46500) Carberator Pin Tool # 46500Also known as: LIS-46500, LIS46500; Features and Benefits:For fast, sure removal and installation of carburetor linkage pinsAlso for "E" clips and other small partsSkin-packedShipping wt. 1 oz. # LIS46500Read MoreDetails on (LIS46500) Carberator Pin Tool # 46500
In Stock
$8.45
$6.07 -
Lisle 62300 Macpherson Strut Tool< b>62300< /b>< br>< br> McPherson Strut Tool< p>< b>Features and Benefits:< /b>< /p>< ul> < li>Safe - universal - inexpensive.< /li> < li>This is an inexpensive, but super safe strut spring compressor.< /li> < li> Fits all strut spring sizes, import and domestic.< /li> < li> Heavy duty clamps and bolts securely hold spring during operation.< /li> < li> Boxed.< /li> < li> Shipping wt. 6 lbs. 3 oz.< /li>< /ul>< p>< b>Not for use on coil over spring applications.< /b>Read MoreDetails on Lisle 62300 Macpherson Strut Tool
In Stock
$64.95
$41.74 -
(LIS28600) Rear Disc Brake Piston Retraction Tool # 28600
Also known as: LIS-28600, LIS28600; Rotates piston back into the caliper when replacing rear brake pads. This six sided tool now fits more applications. Fits most domestic and some import applications. Push and turn tool to rototate piston into caliper. Use with 3/8" ratchet and extension. # LIS28600Read MoreDetails on (LIS28600) Rear Disc Brake Piston Retraction Tool # 28600
In Stock
$11.95
$7.66
Additional items that match your search
sponsored links
| search suggestions: | ||
|---|---|---|
Shopping Blog | About Become | Send Feedback | Share Your Success Story | Online Degrees | Exava
Our International Sites: Japan | United Kingdom | Germany | Italy
Copyright © 2009 Become, Inc.
if yer hewmen, dawnt qlique dis linc