Similar Searches:

All Categories > Automotive > Parts & Tools > Tools

1 to 6 of 6 products for

Otc High Lift Jack Stands

view: list | grid

The following products are limited to brand: otc (All Products)

  1. 38% offotc lift transmission jack
    OTC 1791 1,000 lb. Capacity High Lift Transmission Jack
    High Lift Transmission Jacks Type: Pedestal Transmission Jack Load Capacity: 1000 Minimum Height: 36 Maximum Height: 73-1/2

    Details on OTC 1791 1,000 lb. Capacity High Lift Transmission Jack

    Read More

    In Stock

  2. 29% offotc 1793a
    SPX 1793A OTC High-Lift Transmission Jack
    Item #: OTC1793A. Features benefits: universal saddle tilts front to back and side to side features adjustable corner brackets and safety chain for optimum positioning of the load Flash-chromed rams inhibit rust from entering the hydraulic system Foot-operated pump and lowering pedal for ease of control when positioning or removing a transmission Wide leg base with 4" polyurethane swivel wheels that provide stability and easy maneuvering (brakes on two of the wheels) Safety overload system to prevent ...

    Details on SPX 1793A OTC High-Lift Transmission Jack

    Read More

    In Stock

  3. otc stinger air hydraulic
    (OTC1794A) Stinger Air/Hydraulic 1,000 Lb. Capacity High Lift Transmission ...
    Also known as: OTC-1794A, OTC1794A; Features and Benefits: Air-assist primary stage for rapidly raising the mounting head, activated by depressing foot pedal Hydraulic secondary stage for precise operator control, activated by a hand pump to raise the load, and a release knob to lower the load Big, easy-to-grip knobs that make mounting head adjustments simple, and a safety chain for securing the load Wide leg base with 4" polyurethane swivel wheels that provide stability and easy maneuvering Safety ...

    Details on (OTC1794A) Stinger Air/Hydraulic 1,000 Lb. Capacity High Lift Transmission Jack # 1794A

    Read More

    In Stock

  4. otc transmission jack 1792
    Tools (OTC1792) 1,000 lb. Capacity High-Lift Transmission Jack # 1792
    Also known as: OTC-1792, OTC1792; Universal mounting head provides wide fore and aft tilt range, making alignment of transmission easier. Foot pump and pedal release mechanism of OTC-1791 gives precise control when positioning or removing a transmission . Adjustable nylon tie-down strap safely secures load . Two-stage hydraulic cylinder design speeds lifting of transmission into position for installing . Carries OTC’s Lifetime Marathon Warranty®. # OTC1792

    Details on Tools (OTC1792) 1,000 lb. Capacity High-Lift Transmission Jack # 1792

    Read More

    In Stock

  5. otc 2-ton
    Tools (OTC1533) 2-ton Aluminum Racing Jack with Pair of 2-ton Aluminum Jack ...
    Also known as: OTC-1533, OTC1533; Aluminum Racing Jack lifts two tons and weighs only 43 lbs.! Five pumps to max. height 18". Low profile 3-1/2" makes it perfect for ground hugging, high performance cars. Includes side-mounted handles for quick and easy carrying. Made from aircraft-grade aluminum. Two-piece, 45" long handle snaps together for quick setup. Removable, rubber saddle pad protects vehicle and prevents slipping. Aluminum Jack Stands 2-ton capacity. 10-1/4" min. height ...

    Details on Tools (OTC1533) 2-ton Aluminum Racing Jack with Pair of 2-ton Aluminum Jack Stands # 1533

    Read More

    Related Products
    Related Products

    In Stock

  6. otc 5105a
    Tools (OTC5105A) OTC Tools & Equipment # 5105A
    Also known as: OTC-5105A, OTC5105A; HIGH LIFT DUAL WHEEL DOLLY # OTC5105A

    More Details

    Related Products
    Related Products

    In Stock

  7. Additional items that match your search
  8. 36% offotc 20-ton
    Tools (OTC1783) Heavy Duty 20-Ton Capacity Adjustable Support Stand # 1783
    Also known as: OTC-1783, OTC1783; Features and Benefits: The rugged steel construction and large 15-1/2" base will satisfy support requirements up to 40,000 lbs. Features include four-position adjustment Height range is 15-1/4" to 24" Saddle diameter is 6" Covered by OTC Lifetime Marathon Warranty Big service jobs are no problem for this heavy-duty support stand. Any heavy duty truck or off-road equipment service shop should have 2 pairs of these for safe and secure lifting support. Meets ...

    Details on Tools (OTC1783) Heavy Duty 20-Ton Capacity Adjustable Support Stand # 1783

    Read More

    Related Products
    Related Products

    In Stock

  9. otc 2-ton
    (OTC2018A) 2-Ton Tripod Stand # 2018A
    Height Range: 58-7/8" to 91-5/8". OTC2018A

    More Details

    Related Products
    Related Products

    In Stock

  10. 11% offotc stinger service jack
    Tools (OTC1504A) 3-Ton Stinger Service Jack # 1504A
    Also known as: OTC-1504A, OTC1504A; Jack has a built-in safety overload system that prevents use beyond its rated capacity. With rear swivel casters, maneuvering and positioning the jacks is an easy task. Lifting range of 6 to 23-1/2. # OTC1504A

    Details on Tools (OTC1504A) 3-Ton Stinger Service Jack # 1504A

    Read More

    In Stock

  11. 19% offotc 3-ton
    (OTC1772C) Stinger 3-Ton Jack Stands - Pair # 1772C
    Also known as: OTC-1772C, OTC1772C; Formed and welded steel base for strength, self-locking ratchet handle that cannot be released under load. Durable baked enamel finish resists corrosion. Stands conform to ANSI PALD-4 load rating standard, are factory tested before shipment. 2 Year Warranty Base: 8-1/4" x 7-1/2" Height range: 11-5/8" to 17-1/8" # OTC1772C

    Details on (OTC1772C) Stinger 3-Ton Jack Stands - Pair # 1772C

    Read More

    Related Products
    Related Products

    In Stock

  12. otc ton motorcyle lift
    OTC 1545 Stinger 1-1/2 Ton Motorcyle Lift

    Star FullStar FullStar FullStar FullStar Full

    - 1,500 lb. capacity and 17" long skids that will lift the largest, widest cruisers. - Lowest clearance available, 3-1/2" at lowest level, with a wide lift range of 3-1/2" to 16-3/4". - Removable handle provides 360 access to lo

    Details on OTC 1545 Stinger 1-1/2 Ton Motorcyle Lift

    Read More

    In Stock

  13. otc aluminum racing jack
    Tools (OTC1537) Stinger 3000 Lb Capacity Aluminum Racing Jack # 1537
    Also known as: OTC-1537, OTC1537; Lifts 1-1/2 ton and weighs only 42 lbs.! Dual pump pistons just four pumps gets you to maximum height of 18 inches Meets ANSI PALD, Part 10, for safety and quality. Low profile 3-1/2 inches makes it perfect for ground hugging, high-performance cars Weighs just 42 pounds and includes side-mounted handles for quick and easy carrying Aircraft-grade billet aluminum provides strength with maximum weight savings Two-piece, 44-1/2" long handle snaps together for quick setup ...

    Details on Tools (OTC1537) Stinger 3000 Lb Capacity Aluminum Racing Jack # 1537

    Read More

    In Stock

  14. 31% offotc 5012a
    OTC 5012A 25-Ton Under Axle Jack
    Under-Axle Jack - 25 Ton Self-retracting, air-driven ram uses standard shop air. Release valve automatically applies air to retract ram. Low 8" minimum working height enables jack to get under any truck in the shop. Positioning jack is easy, even under vehicles with set-back axles, thanks to 53" handle that locks into any of three positions, from vertical to horizontal. Maximum lift is 21" when used with optional No. 220972 extension. Lifting range: 8" min. ht. screw ret., 18" max. ht. screw ext., 11-3/4" ...

    Details on OTC 5012A 25-Ton Under Axle Jack

    Read More

    In Stock

  15. otc ton service jack
    OTC 1526 Stinger Quiklift 3 1/2 Ton Service Jack
    The ideal floor jack for either a large automotive service center or a one-person shop. Gets to the load quickly. One pump to load, three pumps to full height unloaded.

    Details on OTC 1526 Stinger Quiklift 3 1/2 Ton Service Jack

    Read More

    In Stock

  16. otc 12-ton
    OTC 1784C Stinger 12-Ton Jack Stands - Set of 2
    Item #: OTC1784C. Features & Benefits: Formed and welded steel base for strength Self-locking ratchet handle cannot be released under load Durable baked enamel finish resists corrosion Conforms to ANSI Pald-4 load rating standard Factory tested before shipment Pair of 12 ton ratchet style jack stands are another quality product from OTC! Use only in pairs, these adjustable jack stands ensure safe and secure lift of passenger vehicles and pickup trucks. Base: 12-5/8" x 11-3/8". Height range: 19-1/2" to ...

    Details on OTC 1784C Stinger 12-Ton Jack Stands - Set of 2

    Read More

    Related Products
    Related Products

    In Stock

  17. 29% offotc category automotive jacks
    5 Ton Hydraulic Floor Service Jack (OTC1505B) Category: Automotive Jacks
    Item #: OTC1505B. Features benefits: spring loaded 40" handle built in safety load prevents use beyond rated capacity foot pedal speeds the lifting operation handle can be locked into any position lifitng range: 6" to 22" otc's 5 ton hydraulic floor jack is very easy to use and handy to have around your shop. it has a built-in safety overload, that prevents using the jack beyond its rated capacity. the convenient foot pedal speeds the lifting operation. also, the handle has a lock and release control ...

    Details on 5 Ton Hydraulic Floor Service Jack (OTC1505B) Category: Automotive Jacks

    Read More

    In Stock

  18. otc 1500a
    OTC 1500A Stinger 3-Ton Hydraulic Service Jack with Stands
    Features and Benefits: 3 Ton Hydraulic Service Jack Light compact design makes this easy and convenient to use Built in safety overload system prevents use beyond its rated capacity Rear swivel casters 5 in. saddle diameter; 21 in. overall reach, 6-1/4 in. frame height, 37-1/2 in. handle length, and a floor space of 14 in. x 26 in. Lifting range: 6 in. to 23-1/2 in. Pair of 3 Ton Ratchet Style Jack Stands Steel ...

    Details on OTC 1500A Stinger 3-Ton Hydraulic Service Jack with Stands

    Read More

    Related Products
    Related Products

    In Stock

    See item
  19. 27% offotc hydraulic bottle jack
    OTC (OTC4312A) Stinger Hydraulic Bottle Jack - 12 Ton
    Competitively priced bottle jacks that offer quality and reliability you expect. Fewer working parts, extremely smooth bearing surfaces, and close tolerances ensure trouble-free service and long life. Screw adjustable pad. Jacks can be used in vertical and horizontal positions. 2 year warranty. 9-1/16" min. height x 5-3/4" stroke, 3-1/8" screw adjustment length.

    Details on OTC (OTC4312A) Stinger Hydraulic Bottle Jack - 12 Ton

    Read More

    In Stock

  20. 23% offotc hydraulic bottle jack
    OTC (OTC4320A) Stinger Hydraulic Bottle Jack - 20 Ton
    Competitively priced bottle jacks that offer quality and reliability you expect. Fewer working parts, extremely smooth bearing surfaces, and close tolerances ensure trouble-free service and long life. Screw adjustable pad. Jacks can be used in vertical and horizontal positions. 2 year warranty. 9-1/2" min. height x 5-15/16" stroke, 2-3/8" screw adjustment length.

    Details on OTC (OTC4320A) Stinger Hydraulic Bottle Jack - 20 Ton

    Read More

    In Stock

Search within results:
Find by Color:

collapse/expand
Find by Price:
  • $to $
collapse/expand
Find by Brand:
collapse/expand
Find by Store:


Pocket Change

Sign In | Create Account | My Pages

Shopping Blog | About Become | Send Feedback | Share Your Success Story | Online Degrees | Exava

Our International Sites: Japan | United Kingdom | Germany | Italy

Copyright © 2009 Become, Inc.Terms of Use

if yer hewmen, dawnt qlique dis linc